Oil in Water Content Monitors, Alarms for Pollution Control, Separators and Bilges. bilge alarms, oil in water, oil/water, oils, oily, water, wastewater, fuels, hydrocarbons, petroleums, separators, pollution, ships, bilges, spills, slicks, detector, control, discharges, effluents, skim, oil coolers, tanks, tankers, sumps, boilers, washdowns, emulsions, controls, seperators, separaters, condensates, power plants, coast guard
Inventive Systems Inc. - Oil in Water Inventive Systems Inc. - Oil in Water

 

Table of Contents

Home

Inventive Systems Inc.
P.O. Box 220
21797C N. Coral Drive
Lexington Park, MD 20653

Phone: 301 863-5153
Toll Free: 800 873-5153
Fax: 301 863-7583
E-mail: isi@oilinwater.org
Web: www.oilinwater.org

Models

All models are calibrated at the factory to the customer's specifications.

BA-200 Oilarm
Self cleaning 15 ppm Oil Content Alarm built with U.S.C.G. and A.B.S. approvals, fulfilling all the requirments of IMO Resolution A.393(X), suitable for detection of oil-in-water from 2 ppm greater than 150 ppm. Power requirements: 120VAC, 50/60 Hz at 60 watts. Equipped with a 6 hole , #150 Navy flange.
BA-200WP Oilarm, Weather Proof
BA-200 with a NEMA4 Weather Proof case. Not submersible.
BA-200X Oilarm, Explosion Proof
BA-200 with Explosion Prood Housing (NEMA4, Class 1, Division 1, Group D). Not submersible.
BA-200HT Oilarm, High Temperature
BA-200 High Temperature Model rated at 116C (240F).

BA-200XC CENELEC Approved Explosion Proof
BA-200XHT Oilarm, High Temperature and Explosion Proof
BA-200WPHT Oilarm, Weather Proof and High Temperature

BA-200 Options
Model Install01 Installation Kit - Stainless Steel Mounting and Plumbing Kit
Model 10025 Digital Display - Indicates the oil content in ppm.
Model 10026 Display Enclosure - 4"x4"x3" enclosure

Model CL001 4-20mA Current loop
Model OACK-3000 Calibration Kit
Model PWR220 220VAC 50/60Hz power
Model B165 ANSI 4 hole #150 Flange (B16.5
)
Model 10040 Explosion Proof meter (10025) and Case
Model DIN2576 DIN 2576 4 Hole Flange
Model HPR001 High Current 10 Amp 250VAC SPDT Relay



OS-100M Oil Sentry
Oil Content Monitor built to USCG/IMO requirements; consisting of self cleaning Sensor Unit, Control Unit with built-in
Strip Chart Recorder, Remote Indicating Console and interconnect cable.
OS-100M1 Oil Sentry
OS-100M without Strip Chart Recorder
OS-100X Oil Sentry, Explosion Proof
OS-100M with Sensor Unit modified for hazardous environments (NEMA 4, Class 1, Division 1, Group D).
OS-100WP Oil Sentry, Weather Proof, OS-100M with Sensor Unit modified for NEMA 4.

OS-100XHT Oil Sentry, Explosion Proof and High Temperature.
OS-100WPHT Oil Sentry, Weather Proof and High Temperature.

 

Home page.